prep walls for painting this colorful walls

Redecorating your house will be a lot of effort. When painting your interior walls, you need to prepare things, or else your work will be messy.

Learn how to prep walls for painting in order for your session to work smoothly. Researching an appropriate method for preparation and painting work is worth your time.

Repair any cracks and even large or small holes on sight immediately. You should also grit and clean the surface, drywall, or plaster using sand papers and cleaner spray.

Never forget to consider different kinds of wall surfaces and finishes. Reading a guide is not a waste of time either. When you’re all set, choose the right type of primer and paint. Then, you can apply any paint colors to the wall according to your design ideas.

How to prep walls for painting – 1st steps

Prepping walls for painting is essential to get the best outcome. By following the proper preparation method, you can ensure that the paint will stick to the wall. By following this procedure, we guarantee that your paint works will have a clean and smooth appearance.


Wall Cleaner Spray - Natural Wall Cleaning for Paint, Wood, Cabinets, Steel, Wallpaper

wall cleaner

Wall Cleaner Spray - Natural Wall Cleaning for Paint, Wood, Cabinets, Steel, Wallpaper

wall cleaner
Vanilla – 985 Servings IN STOCK ready to ship
      4.9 of 5 7 REVIEWS
  • ✔️ BEST WALL CLEANER: Clean without damage. Walls, cabinets and surfaces.
  • ✔️ POWERFUL NATURAL INGREDIENTS: No toxic junk. Safe around children & pets.
  • ✔️ NATURAL ESSENTIAL OILS: Lavender essential oils as scent.

$14.99

30-Day
Money Back Guarantee

Free ground shipping View Label / Ingredients

wall cleaner spray natural

We will discuss a proven and effective method on how to prep walls for painting. To achieve perfection, you need to be meticulous when following the steps below:

Scrape and grit old paints
Make your job trouble-free by removing the old paint coating and the loose paint that bubbles up on the surface. It will be hassle-free later on when you put on the primer for the wall.

What you need:

  • fine grit sandpaper
  • putty knife/paint scraper

Directions:

  • With a paint scraper, remove the cracking and flaky loose paint.
  • Scrub the wall with sandpaper to scrape away the old paint coat.

How to prep walls for painting – Clean the wall surface
Start cleaning walls right after scraping the old paint. Washing away the stains is helpful because paint coatings will have a hard time sticking on a dirty surface.Use a natural cleaning spray from TCC for a better cleaning experience. Our cleaning spray is the best at eliminating grimes and stains.

What you need:

  • Vacuum cleaner
  • Warm water
  • Cleaning spray

Sponge Directions:

  • If there is wallpaper on your wall, remove it. Then, proceed to step
  • Suck up all the dirt with a vacuum cleaner.
  • Wash away the grimes and stains with a cleaning spray and warm water.
  • Using the damp sponge scrub the surface until the residue is gone.
  • Wait for the wall to dry.

Repair holes and cracks in the drywall
You should look for cracks and holes in the wall. You need a uniform surface for your paint project.

What you need:

  • Joint compound
  • Putty knife
  • Paper tape or drywall tape

Drywall patch (optional)Directions:

  • Fill the smaller holes or cracks with a joint compound. For larger holes, it is easier if you apply a drywall patch.
  • Scrape the joint compound with a putty knife to make the surface even.
  • Apply the tape on the holes and cracks after removing the excess compound.

How to prep walls for painting – Use primer on your wall

Most of the time primers are needed when prepping walls. The role of the primer is to assure that your paint holds on to the surface. However, you can recoat water-based paints over the old color.

Before putting a primer on the wall, make sure to use the right type. For example, latex paints won’t have binding capabilities with oil-based paints or glossy wall finish. In this instance, apply a bonding primer before painting.

There is also a multipurpose primer which is a widely popular choice. If you are unsure what to use, then opt for this one.

Other tips on how to prep walls for painting

wall painting tools

In prepping a wall for painting, you should consider what type of wall surface are you working with. Choose the appropriate primer and paint. Factors for choosing to depend on your wall finishes and surface types. If one or another is incompatible the result will be a disaster.

Familiarize yourself with the texture and type of surface you are working with. We listed here the helpful tips you can apply when preparing a wall for painting.

Prepping a wall with wallpaper

  • When working on a wallpapered surface, peel the wallpaper first. The wallpaper is easy to remove. Be careful to prevent damage or scratches on the plaster surface.
  • Sometimes other wallpaper leaves a paste which can be tricky to remove. If that happens, take it off gently with a stripping knife. Be careful to prevent damage or scratches on the plaster surface.
  • When there are scraps of wallpaper left, soak them with a sponge plus warm water. After removal, finish it off by scrubbing the wall with sandpaper.

Preparing a new plaster

  • Fresh plaster is absorbent. Since the surface is porous, the first coating will be deliberately absorbed. The primer finish might require more volume and work to achieve consistency. Because of the absorbency of the fresh plaster, we recommend using a primer before painting.
  • A mist coat is an alternative first coating solution. To prepare the mist coating paint, dilute it by a 7:3 ratio for water and primer. You can apply the coating primer and left to dry for a few hours. After drying, your wall is ready for painting works.

Prepping a brick wall for painting

  • Prepping a brick wall is almost the same as preparing plastered walls. Masonry can also be porous. Therefore it will absorb some of the paint on the first coating application. This phenomenon can lead to an uneven and rough finish or peeling.
  • In order to save money you should apply a mist coating technique. You could do this by creating a solution with 70% water and 30% primer. After evenly mixing the mist coat, you can now proceed to another primer coating.
  • One mist coat and allow it to dry before painting two coats using the undiluted paint.

FAQS

How to prep walls for painting?

The first step is the scraping and then the cleaning of the wall. It is also preferred to clean walls before repairing and filling up the cracks and holes in the drywall. Sanding walls before painting may also be of help–this can be done using a sanding block or sandpaper.

After fixing and washing away the stains here comes the primer paint which has different types depending on the application.
Other tips like removing wallpapers, setting up a new plaster, or even prepping a brick wall are helpful to read.

Why primer is important before painting walls?

The primer of your choice is also a base for the paint to stick to. Its secondary importance is to conceal imperfections such as patches, stains, and tapes. Primer comes in different types (i.e. tinted primer) due to differences in purposes and application to surfaces.

When you put a primer before paint application on rough surfaces so it can become uniform for a seamless painting of the wall. Your primer can also enhance the color of the paint you are using.
Usually, only one coat of primer is needed when you need to repaint. If you plan to make drastic changes to the interior you could do more than one coating.

What is the best cleaner spray for walls before painting?

You must clean walls before you do some paint job. The TCC cleaner spray will ease your cleaning chores as well as deliver a shining and grime-free outcome. This naturally made cleaning solution has a gentle formula and is not toxic.

How to properly apply the joint compound?

Gently and slowly fill any hole or crack with the joint compound. Then, scrape the excess in order to even out the surface. After application and if the filling is flattened put the paper tape on the filled cavity.

Prep and clean your wall before painting

Prep your walls by removing stains, and flaky old paints and cleaning your wall first with a wall cleaner spray. Paint will not bond well on dirty wall surfaces.


Wall Cleaner Spray - Natural Wall Cleaning for Paint, Wood, Cabinets, Steel, Wallpaper

wall cleaner

Wall Cleaner Spray - Natural Wall Cleaning for Paint, Wood, Cabinets, Steel, Wallpaper

wall cleaner
Vanilla – 985 Servings IN STOCK ready to ship
      4.9 of 5 7 REVIEWS
  • ✔️ BEST WALL CLEANER: Clean without damage. Walls, cabinets and surfaces.
  • ✔️ POWERFUL NATURAL INGREDIENTS: No toxic junk. Safe around children & pets.
  • ✔️ NATURAL ESSENTIAL OILS: Lavender essential oils as scent.

$14.99

30-Day
Money Back Guarantee

Free ground shipping View Label / Ingredients

wall cleaner spray natural

Do the sanding of walls with fine-grit sandpaper. You can then apply The Crown Choice cleaner spray and a damp cloth to clean and wash away the dirt.

If you know how to prep walls for painting, then your job will be easier. You can start painting as soon as you’re done with the preps mentioned above. The cleaner spray will help in your prep work. It can also be utilized as a cleaner for other household surfaces.

After you clean the surface, you can proceed to paint. Remember that when you will do some painting work, always prepare a drop cloth. Drop cloths prevent unwanted paint stains. It will also save you from impending troubles.

Similar Posts

Leave a Reply

Your email address will not be published.