PATENTED Suction Soap Dish Holder for Shower, Bathroom, Tub | Stainless Steel Bar Soap Holder Saver Tray

Read all 94 reviews
PATENTED Suction Soap Dish Holder for Shower, Bathroom, Tub | Stainless Steel Bar Soap Holder Saver Tray PATENTED Suction Soap Dish Holder for Shower, Bathroom, Tub | Stainless Steel Bar Soap Holder Saver Tray
PATENTED Suction Soap Dish Holder for Shower, Bathroom, Tub | Stainless Steel Bar Soap Holder Saver Tray

PATENTED Suction Soap Dish Holder for Shower, Bathroom, Tub | Stainless Steel Bar Soap Holder Saver Tray

Read all 94 reviews
  • $6.99
  • $11.99
Out of Stock

FREE shipping for all orders within the US. Hawaii and Alaska not included.

No Hassle Returns with our no questions asked 30 day return policy.

  • ��IMPORTANT�� Refer to the image guide to see which surfaces do and do NOT work. PLEASE Read the description below >>>
  • ⭐THE ORIGINAL SOAP DISH⭐ Our suction soap holder tray is the original. Patented across 8 countries using an outer sticky gel to create an airtight seal to prevent falling off.
  • QUALITY MATERIALS: The product is Made in Korea with very stringent quality control requirements.
  • MAX LOAD 11lbs: Suction cup of the soap dish will handle the weight of any soap in the shower or bathtub.
  • EASY 1 MIN INSTALL: No need for glue, tools, or screws. Just find a flat shiny/glossy sealed surface and twist to create a power vacuum. 
  • Security policy (edit with module Customer reassurance) Security policy (edit with module Customer reassurance)
  • Delivery policy (edit with module Customer reassurance) Delivery policy (edit with module Customer reassurance)
  • Return policy (edit with module Customer reassurance) Return policy (edit with module Customer reassurance)
  • ��IMPORTANT�� Refer to the image guide to see which surfaces do and do NOT work. PLEASE Read the description below
  • ⭐THE ORIGINAL SOAP DISH⭐ Our suction soap holder tray is the original. Patented across 8 countries using an outer sticky gel to create an airtight seal to prevent falling off.
  • QUALITY MATERIALS: Each suction soap dish is Made in Korea with strict quality control. Suction cup and cap is chrome plated plastic. Soap saver tray is stainless steel
  • MAX LOAD 11lbs: Suction cup of the soap dish will handle the weight of any soap in the shower or bathtub.
  • EASY 1 MIN INSTALL: Nail free. No adhesives. No tools, drills, or screws. Place the suction soap dish tray on a flat shiny/glossy sealed surface and twist to create a power vacuum.

Dear Consumer

Thanks for looking at our ORIGINAL suction cup soap dish.

Rather than settling for a weak suction cup that falls off every couple of days, why not use our patented and best suction soap holder for your bathroom, shower?

You could get a cheap suction soap holder and hope for the best. But... you get what you pay for. You'll wake up frightened when the cheap suction falls off in the middle of the night with a loud clash.

************

Here's What You Get

Our suction nail free soap dish is patented across 8 countries and counting.

You can put it in your RV, take it for travel like on a cruise where there is no space to hold basic items.

Our ORIGINAL suction cup uses a sticky outer gel to create an airtight seal. This is our secret to prevent the suction from coming off like copycat and cheaper alternatives.

If you want strong suction that WORKS and looks good, you have come to the right place.

************

Suction Soap Tray Work On

The suction hook works best on ceramic tile, glass, mirror, granite, stainless steel, acrylic, plastic, laminate and any non-porous smooth surfaces.

Suction Soap Tray Does NOT Work On

Suction does not work on uneven, curved, grout lines, unsealed porous surfaces such as: wood, wallpaper, natural stones such unfinished marble, concrete and matte type surfaces.

************

Soap Saver Tray - stainless steel (chrome plated).
Cap – plastic (chrome plated).
Suction cap - gel, rubber.

Dimensions:
5.1in wide x 3.9in tall x 4.0in deep


994 Items

Data sheet

Color :
Stainless, Chrome
Country :
South Korea
ASIN :
B06WGPRSQ8

Customer Reviews

Read all 94 reviews
  • 5 Stars
    65%
  • 4 Stars
    5%
  • 3 Stars
    2%
  • 2 Stars
    9%
  • 1 Stars
    19%
Falls down

By on April 24, 2019

Poor suction

0 comment

Showing 0 comments


Not reliable

By on March 06, 2019

After one and half years it stopped sticking and falling off from the wall

0 comment

Showing 0 comments


DOES NOT WORK.

By CDL on February 10, 2019

It won’t hold on after one month. Put it back and then failed again, even just a small soap.

0 comment

Showing 0 comments


Solid product

By Craig E. Love on November 12, 2018

Easy to install and adheres well to the wall.

0 comment

Showing 0 comments


Best as a Temporary Soap Holder

By Walter A Roberts on November 06, 2018

Will stick to tile or fiberglass for a few hours then falls off !!

0 comment

Showing 0 comments


Murder Soap Holder - Gauranteed to prevent sleep and wake

By JoshMerrGann on August 29, 2018

This falls off once a month wakes my kids and wrecks things in the shower, it also always happens at night when you’re most likely to feel like someone is going to murder you and the loud sound is terrifying when it falls.

0 comment

Showing 0 comments


Nice

By Matthew on July 05, 2018

Easy to install

1 comment

Showing 1 comments


The Scrubbie People Support on July 06, 2018

Thanks for the 5-star review, Matthew! You're a rockstar.

Nice but doesn't stick for long.

By Carlie on May 08, 2018

Very nice product, but suction lasted only shower wall for only a couple of months.

1 comment

Showing 1 comments


The Scrubbie People Support on May 09, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Suction soap dish holder

By Bailey on March 31, 2018

I have this mounted on porcelain tile in my shower. I put it up about a month ago and it has stayed put this whole time. I have a bottle of face cleanser on it but will use it for bar soap eventually. It also looks nice!

1 comment

Showing 1 comments


The Scrubbie People Support on April 02, 2018

Thanks Bailey. It really does look awesome.

Couldn't put it back on and ended up in garbage.

By Rene on March 17, 2018

Worked for a little while (3 months) and then fell off. Couldn't put it back on and ended up in garbage.

1 comment

Showing 1 comments


The Scrubbie People Support on March 19, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

don’t waste your money

By Kelly spellman on March 12, 2018

This doesn’t work, don’t waste your money.

1 comment

Showing 1 comments


The Scrubbie People Support on March 13, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

One Star

By Barbara Cunha on February 11, 2018

Does not stay at the wall. I found at the floor every minute

1 comment

Showing 1 comments


The Scrubbie People Support on February 13, 2018

Hi Barbara. Sorry you had trouble. It always come down to two things. 1. the suction cup was not pushed firmly against the surface 2. the cap was not tightened by 5-6 rotations If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Just perfect for me

By Victoria on February 11, 2018

Looks great, holds firmly to quartz slab, and keeps the soap dry. What more can you ask of a soap dish?

1 comment

Showing 1 comments


The Scrubbie People Support on February 11, 2018

Thanks for the 5-star review, Victoria.

Five Stars

By Amazon Customer on January 15, 2018

Bought this several months ago and we love it! The suction is amazing... Highly recommend!

1 comment

Showing 1 comments


The Scrubbie People Support on January 16, 2018

Thanks for the great review! I bet you followed the instructions to the letter. 

Five Stars

By MK2018 on January 13, 2018

Easy to install and it has stayed put.

1 comment

Showing 1 comments


TheScrubbiePeopleUSA on January 14, 2018

Thanks MK. If people follow the instructions like you, it will stay on like a rock.

Good looking and strong

By MegD on January 09, 2018

Easy to install and hasn’t fallen once since installed 4 months ago.

1 comment

Showing 1 comments


The Scrubbie People Support on January 10, 2018

Wow, 4 months is a good amount of time. Thanks for following the instructions like a boss, Meg! 

Five Stars

By John R M on January 03, 2018

This thing sticks like no other and was easy to instal

1 comment

Showing 1 comments


The Scrubbie People Support on January 04, 2018

Easy indeed, John. Thanks for the 5-star review.

Well made and stays mounted

By Brownie on January 01, 2018

Actually stays mounted to the fiberglass shower. Well made construction.

1 comment

Showing 1 comments


The Scrubbie People Support on January 02, 2018

Thanks Brownie. You're awesome!

Five Stars

By ARACELI on December 26, 2017

Excellent Product!

1 comment

Showing 1 comments


The Scrubbie People Support on December 27, 2017

Thanks for the positive review, Araceli.

Soap Security

By E. T. Young on December 04, 2017

I originally got this intending to put it on tile, but the tiles in my apartment are a little too bumpy, so it ended up on the shower door, but regardless, it's great. Hasn't fallen off, holds my soap perfectly, really lovely design. I just love how secure it is!

1 comment

Showing 1 comments


The Scrubbie People Support on December 20, 2017

Thanks ET. We appreciate the positive review.

Free Shipping on ALL Orders

We provide free shipping ground shipping for all orders. Small or large, we will cover the cost of shipping.

All orders received before 4pm PST are shipped on the same day.

Orders requiring faster priority shipping will be charged a small fee which you can select at checkout. We do not try to make any money off shipping.


Simple Flat Priced Shipping

All orders receive FREE Shipping.

Orders Under $39 Value (3-7 Biz Days) Standard (3-5 Biz Days) Priority (2-3 Biz Days) Express (1-2 Biz Days Guaranteed)
Small & Light
(weighs < 1.3lbs)
FREE $1.99 $3.99 $45 (varies based on size, weight and location)
Regular or Heavy
(weighs > 1.3lbs)
FREE for orders over $39 Not Offered $7.99 $45 (varies based on size, weight and location)

Rates For Expedited Shipping

An additional $45 is added for Express next day air shipping.

If your Express order shipment cost exceeds $45.00 (Typically packages over 3lbs), you will be responsible for the overcharge. We will make every attempt to contact you via e-mail to advise you of the actual charges prior to shipping your package.


Order Deadline is 4PM PST

All products are shipped from our warehouse in Seattle, WA.

Products ship the same day as ordered, if ordered before 4PM, PST. If ordered after 4PM, PST, your order is shipped the following business day.

All orders are shipped Monday - Friday. Orders that are received during the weekend or holidays will be shipped out the next business day.


Shipping Carrier and Speed

In order to provide the best and cheapest shipping rates, the majority of products are shipped via USPS.

If priority shipping is requested at checkout, delivery time will be 2-3 days.

Generally, orders under $39 and under 1lb in weight ship via USPS which can take between 2 and 7 business days for delivery.


Return Shipping

In the event you are not satisfied with your product, you can return the products in its original condition back to us for a full refund within 30 days.

Please contact us within 15 days of receiving your order to obtain a return authorization number. Returns without a return authorization number will not be accepted.

All payments are refunded minus shipping charges. If free shipping was offered on the order, the shipping fee that we incurred to send to you will be deducted from the total refund.

Please return authorized orders in its original form and packaging. We must receive the return within 30 days of the initial order date. We reserve the right to reject any returns and exchanges that do not meet these conditions.


Return all authorized returns to:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027

RETURNS

Our goal is to make sure you are 100% satisfied with the quality of The Crown Choice products.

However, we understand that we cannot be 100% perfect and you may want to return your order.

In the event you are not satisfied with your product, you can return the products in its original condition and packaging back to us for a full refund within 30 days.

If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.


Request a Return Merchandise Authorization

Please note, to be eligible for a return, please contact us within 15 days of receiving your order to obtain a return authorization number. Returns without a return authorization number will not be accepted.

All payments are refunded minus shipping charges. If free shipping was offered on the order, the shipping fee that we incurred to send to you will be deducted from the total refund.

Please return authorized orders in its original form and packaging. We must receive the return within 30 days of the initial order date. We reserve the right to reject any returns and exchanges that do not meet these conditions.


Refunds (if applicable)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.


Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us from your account, or directly at [email protected]


Exchanges (if applicable)

We only replace items if they are defective or damaged.

If you need to exchange it for the same item, send us an email at [email protected] and send your item to:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027


Return Shipping

To return your product, you should mail your product to after you receive an RMA number:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027

You will be responsible for paying for your own shipping costs for returning your item.

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

You may also like...