PATENTED Suction Kitchen Sponge Holder and Brush Sink Caddy | Stainless Steel Sink Organization Suction Basket for Sponges

Read all 338 reviews
PATENTED Suction Kitchen Sponge Holder and Brush Sink Caddy | Stainless Steel Sink Organization Suction Basket for Sponges PATENTED Suction Kitchen Sponge Holder and Brush Sink Caddy | Stainless Steel Sink Organization Suction Basket for Sponges
PATENTED Suction Kitchen Sponge Holder and Brush Sink Caddy | Stainless Steel Sink Organization Suction Basket for Sponges

PATENTED Suction Kitchen Sponge Holder and Brush Sink Caddy | Stainless Steel Sink Organization Suction Basket for Sponges

Read all 338 reviews
  • $11.99
  • $13.99
Out of Stock

$1.99 Shipping on this item. Free Shipping when order value is over $39.

No Hassle Returns with our no questions asked 30 day return policy.

  • SUCTION SPONGE HOLDER: Suction is powerful and will stick like a rock.
  • QUALITY MATERIALS: The product is assembled in USA under strict quality control.
  • NOT FOR: granite composite or matte surface sinks. ONLY for stainless, ceramic, acrylic, fiberglass, glass type surfaces.
  • ## FOLLOW THE INSTRUCTIONS ## You MUST PUSH the rim of the suction cup firmly against the surface and then SCREW ON 3-5 times.
  • ## IMPORTANT ## Refer to the image guide and make sure you have a compatible surface for the suction cup. Also read the description below >>>
  • Security policy (edit with module Customer reassurance) Security policy (edit with module Customer reassurance)
  • Delivery policy (edit with module Customer reassurance) Delivery policy (edit with module Customer reassurance)
  • Return policy (edit with module Customer reassurance) Return policy (edit with module Customer reassurance)
  • PLEASE! FOLLOW THE INSTRUCTIONS. You MUST PUSH the suction cup firmly against the surface and then SCREW ON 5-6 FULL turns.
  • STICKS ON BUT REUSABLE: Our patented suction sponge holder and brush sink caddy stays on with a powerful suction. IF ever you want to move it, just take a look at our removal & reapply instructions.
  • ASSEMBLED IN THE USA: The item is assembled in USA with very strict quality control requirements. Suction cup and cap is chrome plated plastic. The sponge basket is stainless steel.
  • DO NOT USE THIS ON: granite composite or matte surface sinks. 
  • YOU CAN STICK THIS: ONLY for stainless, ceramic, acrylic, fiberglass, glass type surfaces. Sink suction caddy is best for sponges, dish brush & other small items.
  • ## IMPORTANT ## Refer to the image guide and make sure you have a compatible surface for the suction cup. Also read the description below >>>

Dear Consumer,

Thank you for your interest in The Crown Choice extra long bottle cleaning brush.

We've listened to your feedback and have created a bottle washer to fit all NARROW neck bottles, jars, carafes, tumblers and other hard to clean bottles and items.

The brush head is FLEXIBLE (not stiff) and extra long at 8" and 2.5" wide. Makes it easy to reach all sides of the bottle with less effort. You can clean Swell, plastic, bird feeders and other bottles, jars, carboys and anything with small tight openings.

The extra long handle makes it easy to grip. When you have 40 bottles to clean before you start your next batch of home brewed beer, wine, tea or kombucha, you'll be glad the brush is easy to hold and sturdy.

For best results, use this brush for beer bottles, kombucha cleaning, wine bottles, decanters, hummingbird feeders, and water bottles, vases, teapots, carafes, growlers. Even soda bottles.

Install Instructions


1000 Items

Data sheet

Height :
4"
Width :
7"
Depth :
3.5"
Color :
Stainless & Chrome
ASIN :
B073PMRLG9

Customer Reviews

Read all 338 reviews
  • 5 Stars
    57%
  • 4 Stars
    8%
  • 3 Stars
    4%
  • 2 Stars
    10%
  • 1 Stars
    21%
Stops working in less than a year

By Max on June 19, 2018

Bought product in October of 2017. Caddy did its job and held for 8 months, and now cannot support the weight of itself. Without even holding any sponges, brushes, etc, the suction fails and the caddy falls after an hour or so. Perhaps the product would work if it used a normal suction cup. This version uses a sticky pad that needs to be screwed into the basket base to tighten.

0 comment

Showing 0 comments


Stopped sticking

By Vlrech on June 17, 2018

Worked great for the first few months but no longer sticks.

1 comment

Showing 1 comments


The Scrubbie People Support on June 19, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Perfect design, keeps items handy and tidy.

By Pamela Z. on June 17, 2018

This works better than I expected. We bought a stainless farm sink and this fits perfectly in the far corner. Easy to install, and The suction holds strong. Easy to remove for deep-cleaning of the sink, and goes right back on. I put a scrubber with soap in the handle in the round holder and a plastic scraper and scrubbiest pad in the little bin

1 comment

Showing 1 comments


The Scrubbie People USA on June 18, 2018

Thank you for the review Pamela. Glad to hear it is working out on your sink.

worst product you can imagine

By Andy Biswas on June 16, 2018

worst product you can imagine. I should have looked at all the complaints by others - it never sticks. from the very 1st day it keeps falling. And don't tell me how you have to clean the surface, etc etc. I know how to read instructions and follow them. DO NOT BUY THIS IF YOU DON'T WANT TO LOSE MONEY!!!!!!!

1 comment

Showing 1 comments


The Scrubbie People USA on June 18, 2018

Hi Andy, We offer full refunds. Sorry that you didn't get it working but contact us and we'll be more than happy to refund.

It's nice looking, but it just doesn't stay on

By E.Hernandez on June 14, 2018

This thing can't seem to stop falling off the sink. It's nice looking, but it just doesn't stay on. I followed all the instructions, but it works for a few hours and then falls off. I took to long to open and use, so it's past the return time. Buyer beware...

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Good but no miracle

By Stevie G on June 14, 2018

Good quality. Had hopes that it would be different, but after three attempts to get it to stay on the sink, I give up. It seems like a better design than others and it does stick, but is easily knocked off.

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

It stays stuck !!!

By Donna Randle on June 14, 2018

I love the fact that it stays suctioned to the sink. My scrubber wand fits perfectly which keeps it from dripping all over my counter. Great product.

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Thanks for the 5-star review, Donna!

Not bad

By emily mccollum on June 14, 2018

Eh, it works and looks nice... just want very impressed over all I guess with how the product set up was for the sink. I cant tighten it anymore, so it's a little loose.

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Two Stars

By Bonnie Slater on June 13, 2018

It won't stay attached to my sink. It just keeps falling off. :(

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Five Stars

By Upseveryday on June 13, 2018

Works great - follow installation instructions for success.

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Great tip, Useveryday! Thanks for the 5-star review.

Five Stars

By GC on June 13, 2018

useful, sticks well to the sink, right size.

1 comment

Showing 1 comments


The Scrubbie People Support on June 16, 2018

Thanks for the 5-star review, GC!

Three Stars

By Aleysha on June 11, 2018

This product keeps falling down after about 3 months of a solid stick

1 comment

Showing 1 comments


The Scrubbie People Support on June 13, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Great space saver for your sink sponges

By P. Trueax on June 10, 2018

Love this unit holds my sponges and wand soap dispenser. Easy to install and for will in the sink and out of the way. Highly recommended.

1 comment

Showing 1 comments


The Scrubbie People Support on June 12, 2018

Thanks for the 5-star review!

Does not work

By Rebecca on June 06, 2018

Unfortunately the product just does not stay stuck to the sink - falls down every few hours.

1 comment

Showing 1 comments


The Scrubbie People Support on June 07, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Stainless steel knob looks much nicer than plastic suction cups.

By S. G. O. on June 06, 2018

Looks great with my new Stainless Steel 10 inch deep kitchen sink. Easy to install. Follow simple directions that come with basket. Has not fallen off since installed. Fast shipping.

1 comment

Showing 1 comments


The Scrubbie People Support on June 07, 2018

Thanks for the tip and the 5-star review, SGO!

It works!

By Ellen MPet on June 05, 2018

Easy to install. Just what I was looking for.

1 comment

Showing 1 comments


The Scrubbie People Support on June 06, 2018

Thanks for the 5-star review, Ellen!

Works great!

By B. Grossmeyer on June 04, 2018

Works perfectly! I followed the steps, pushed hard and then turned the dial and it's stayed ever since! It was exactly what I was looking for.

1 comment

Showing 1 comments


The Scrubbie People Support on June 05, 2018

Thanks for the 5-star review!

I didn't like the "suction cup"

By Amazon Customer on June 04, 2018

I didn't like the "suction cup". It looked as tho you might never get it off once it had adhered and would be hard to clean around. I was going to send it back but I just donated it to a ressale shop for the humane society.

1 comment

Showing 1 comments


The Scrubbie People Support on June 05, 2018

You just actually need to loosen the dial then pull the product from your sink.

Stays stuck and fits all my products

By Logan M. on June 04, 2018

I like this product! I bought this one over some of the other options because most of the other ones just hang over the lip (i.e. don't attach to one spot very well) and because it has room for my sponge, metal sponge ball thing, and handle sponge. It stuck on easily the first time, and hasn't come off.

1 comment

Showing 1 comments


The Scrubbie People Support on June 05, 2018

Thanks for the 5-star review, Logan!

Won’t stay on

By Indigo on June 04, 2018

I found that this product will only stay on for 1 day, then it falls off, no matter how tight I turn the knob.

1 comment

Showing 1 comments


The Scrubbie People Support on June 05, 2018

Hi. Sorry it did not exceed your expectation. There are a few important points that seems to get missed. 1. don't touch or wipe the gel. It will get oily or dusty. 2. the suction cup was not pushed firmly against the surface 3. the cap needs to be tightened 3-5 times (but don't overtighten) see video. If you read Noah's review, you'll see that the same thing happened, but after following the instructions, it works flawlessly. https://www.amazon.com/gp/review/R2OXX1FMD559XH Based on customer feedback, we have new instructions available on this page. ------------ **Removal and Reapply Instructions** 1. Remove the sponge holder. Untighten the cap to release the pressure from the suction cup. 2. Wash the suction cup and gel around the suction with soapy water to remove any impurities and rinse off. (If you have hand sanitizer or alcohol wipes, even better). 3. Do NOT wipe the suction or gel with anything. Just flick off as much water as possible and let AIR dry. This is very important as it will "reset" the stickiness of the gel to its original condition. 4. Make sure the sink surface is also clean and dry. Push the suction cup FIRMLY against the sink and the gel will grab on. 5. Twist the cap clockwise at least 5 times to create the vacuum. Here's the link to the video install again. https://www.amazon.com/PATENTED-Suction-Stainless-Organization-Scrubbers/dp/B073PMRLG9/B076YSSKWH?ref=dp_vse_rvc0

Free Shipping on Most Items and All Orders Over $39

We provide free shipping for most items with no minimums as the majority of our products weigh less than 1lb.

Anything over 1lb will have a small fee added, but if the total order value is $39 or above, you are eligible for free shipping on your order.

All orders received before 4pm PST are shipped on the same day.


Simple Flat Priced Shipping

All orders over $39 receives FREE Shipping.

Orders Under $39 Value (3-7 Biz Days) Standard (3-5 Biz Days) Priority (2-3 Biz Days) Express (1-2 Biz Days Guaranteed)
Small & Light
(weighs < 1.3lbs)
FREE $1.99 $3.99 $35
Regular or Heavy
(weighs > 1.3lbs)
FREE for orders over $39 Not Offered $7.99 $35

Rates For Expedited Shipping

An additional $35 is added for Express shipping.

If your Express order shipment cost exceeds $35.00 (Typically packages over 3lbs), you will be responsible for the overcharge. We will make every attempt to contact you via e-mail to advise you of the actual charges prior to shipping your package.


Order Deadline is 4PM PST

All products are shipped from our warehouse in Seattle, WA.

Products ship the same day as ordered, if ordered before 4PM, PST. If ordered after 4PM, PST, your order is shipped the following business day.

All orders are shipped Monday - Friday. Orders that are received during the weekend or holidays will be shipped out the next business day.


Shipping Carrier and Speed

In order to provide the best and cheapest shipping rates, the majority of products are shipped via USPS.

If priority shipping is requested at checkout, delivery time will be 2-3 days.

Generally, orders under $39 and under 1lb in weight ship via USPS which can take between 2 and 7 business days for delivery.


Return Shipping

In the event you are not satisfied with your product, you can return the products in its original condition back to us for a full refund within 30 days.

Please contact us within 15 days of receiving your order to obtain a return authorization number. Returns without a return authorization number will not be accepted.

All payments are refunded minus shipping charges. If free shipping was offered on the order, the shipping fee that we incurred to send to you will be deducted from the total refund.

Please return authorized orders in its original form and packaging. We must receive the return within 30 days of the initial order date. We reserve the right to reject any returns and exchanges that do not meet these conditions.


Return all authorized returns to:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027

RETURNS

Our goal is to make sure you are 100% satisfied with the quality of The Crown Choice products.

However, we understand that we cannot be 100% perfect and you may want to return your order.

In the event you are not satisfied with your product, you can return the products in its original condition and packaging back to us for a full refund within 30 days.

If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.


Request a Return Merchandise Authorization

Please note, to be eligible for a return, please contact us within 15 days of receiving your order to obtain a return authorization number. Returns without a return authorization number will not be accepted.

All payments are refunded minus shipping charges. If free shipping was offered on the order, the shipping fee that we incurred to send to you will be deducted from the total refund.

Please return authorized orders in its original form and packaging. We must receive the return within 30 days of the initial order date. We reserve the right to reject any returns and exchanges that do not meet these conditions.


Refunds (if applicable)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.


Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us from your account, or directly at [email protected]


Exchanges (if applicable)

We only replace items if they are defective or damaged.

If you need to exchange it for the same item, send us an email at [email protected] and send your item to:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027


Return Shipping

To return your product, you should mail your product to after you receive an RMA number:

The Crown Choice / Open Arm Holdings
1085 12th AVE NW
Suite D2
Issaquah, WA, 98027

You will be responsible for paying for your own shipping costs for returning your item.

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

You may also like...