Best Ways to Clean a Faucet Aerator
Updated September 16, 2021
Cleaning your kitchens and bathrooms is always on top of your to-do list but there are hidden filthy spots that you might be missing like in your faucet aerators.
Ever heard of it?
Well if you notice a slow flow of water in your kitchen faucet, it means that you need to check and clean your faucet aerator.
What is a faucet aerator?
When you take a look at your kitchen or bathroom faucet you’ll see a small part at the end with a mesh screen where water flows. That is your faucet aerator.
It’s a small round fitting that you can screw onto the head of the faucet so that it can produce a non-splashing consistent stream of water every time you use it.
What does a faucet aerator do?
Small as it can be, you can’t underrate the great functions an aerator gives to your kitchen and bathroom faucets. Aside from delivering a steady water flow and preventing splashes everywhere, it also shaped the water streams giving you an evenly pressured streams that won’t go out of control once it hits your hands, sink, and other objects.
Being true to the expression that big things come in small packages, here are the other functions of aerator :
- It maintains and regulates water pressure.
- Improves the flow of the amount of water making it softer to the hands when you wash and gentle to the objects it touches.
- It helps save water as it reduces the amount of water that comes out of the faucet.
- It conserves and reduces energy consumption.
- It catches some debris and sediments due to a small sieve plate that is attached to the aerator.
- It also reduces faucet noise.
Why do you need to clean your faucet aerators?
At first, cleaning the aerator may not seem like something important as compared to giving your kitchen surfaces a good scrubbing to make them twinkling clean.
However, it is beneficial to clean it as it provides slight filtration which means it can affect your water flow because of the debris, grit, sediments, and other deposits that may be caught up in the aerator’s screen mesh.
Fortunately, cleaning aerators every six months is not difficult and you don’t need special tools to clean them either.
How to clean faucet aerator?
Cleaning Brush - Best 3-in-1 small detail cleaning brushes for shower, tiles, windows and more
- ✔ 3-IN-1 BEST DEEP CLEANING SET: Deep clean with this set of brushes.
- ✔ LARGE GROUT BRUSH: Clean grout lines with the large grout cleaning brush.
- ✔ GROUT CORNER BRUSH: Reach hard to clean places with the corner and edge brush.
- ✔ 2-IN-1 DETAIL BRUSH AND SCRAPER: Get places you can see, but can't reach.
You can use a wrench and pliers for unscrewing the aerator. If you are worried about scratching the metal aerator you can wrap electrical tape on pliers before unscrewing it.
So here are the steps on how to clean aerators.
Step 1: Turn off the water supply by closing the valves underneath the sink.
Step 2: Plug the drain so you won’t lose the small parts.
Step 3: Using the plier or wrench you should be able to unscrew the aerator faucet.
Step 4: You can use a toothbrush or dedicated cleaning brush to scrub off any debris with water making sure that the screen holes come out clear.
Step 5: Take out the aerator parts carefully and pay attention to which order you have taken them apart so that it will be easier to reassemble once you’re done.
Step 6: Soak the aerator parts in white vinegar overnight to remove limescale and calcium deposits.
Step 7: Rinse and reassemble the aerator parts.
Step 8: Test the water flow.
Note: If you have a hard time removing the aerator, you can fill a plastic bag with vinegar then use rubber to secure it over the tip of the faucet.
Watch this video:
Frequently asked questions on cleaning aerators
1. How do you remove deposits built up from aerators?
You can soak the aerator in vinegar overnight.
2. Should I need to clean the faucet aerator?
Yes because aerators are prone to develop limescale and other debris that can have risks in your drinking water.
3. What is the best way to clean aerators?
The best way to clean aerators is to soak them overnight with white vinegar or you may use an all-purpose premium liquid cleanser. that effectively removes all hard water stains and calcium build-up in aerators.
Ultimate Hard Water Stain Remover Set - Includes non-scratch scourer, microfiber cloth, gloves and detailing brushes
- ✔️ CLEAN HARD WATER STAIN: All surface hard water stain cleaner
- ✔️ CLEAN, RESTORE & SHINE: Polish all surfaces w/ our brush set
- ✔️ TOUGH CLEANING CLOTHS: Non-scratch scourer & microfiber cloth
The best product to clean aerator.
If you live in an area where the water is hard, it is common that you would have caking on your faucet aerators.
Cleaning them with white vinegar is a natural way to do it. While it can be hard at times to remove these hard deposits, you can always rely on a good product that can easily remove them minus the nasty fumes.